Showing posts with label altered art. Show all posts
Showing posts with label altered art. Show all posts

Sunday, 15 March 2015

Happy Mother's Day - Vintage Bird Cages

It's Mother's Day here in the UK and I finally managed to make something and find five minutes to blog. I am trying to be a better blogger but life is still doing it's best to put obstacles in my way! For the time being I hope you'll forgive my sporadic posts and visits?

Anyway - Happy Mother's Day to all you Mummy's out there whether it's kids with two legs or furry four legged ones! I made these super easy vintage bird cage boxes for my Mum and Mother in Law. I hope you like them?

I did this one for my Mum.


I used a round papier mache box, acrylic paints, a selection of assorted die cuts, flowers, lace, ribbon, pearls and the new Docrafts Nature's Notes Decoupage Pack to create this project.



This was the box for my MIL.


This one was given a brass and copper blend paint effect and I used a pearl effect PVA glue to give the butterflies the look of "Mother of Pearl"



Thanks for stopping by today.

Claire x

I'd like to enter this project into the following challenges:
613 Avenue Create - Anything Goes - x
Pile it On - Use 3 of something - x
Mixed Media World - Anything Goes
Allsorts - Pearls & Flowers - Top 5
My Time To Craft - For a special lady
That's Crafty - Wings & Things - Top 3
2 Creative Chicks - Anything Goes - x
Altered Eclectics - Anything Goes
Rhedd's Creative Spirit - Anything Goes

Wednesday, 17 September 2014

Altered Ribbon Reel -

This is another of the samples that I made for the release of the new Winston CD, you may have spotted it sitting on the counter alongside the altered sardine can. I warn you now there is picture overload on this post but I still failed miserably to capture it properly. It's not often I say this, but the photos really don't do this justice!



I got given this empty ribbon spool by one the members of staff in Hobbycraft who said they just bin them and if I could make any use of it then I was more than welcome to it. So being the hoarder that I am I carried it home with me and shoved it in my stash of altering bits. I have to be honest and say that I'd almost completely forgotten about it until I went to retrieve the sardine can for the other project. That said I glanced at it and thought no more of it until I'd coloured up Sewing Etty and decided that I wanted to decoupage her! Being short of time I decided that I'd scan the image and print multiple copies, however, it changed the colour tone and it no longer fitted with the papers I'd chosen. So I sat and pondered for a while and then suddenly the ribbon reel came to mind and I knew exactly what I would do!


So I grabbed it from the box and sat the image on top of it and as luck would have it, it was the right size! So I set to work and painted the reel with Gesso and Acrylic Paints so that it resembled wood.


Once dry I glued the lace and pearls onto the reel and added some tape measure ribbon that I had in my stash.


I then cut out the image and layered it up before adding glitter and Glossy Accents.


I decided that I wanted the reel to be viewed from all angles so I created a "fabric" panel screen using papers from the CD and hot glued it into place.



I then added the image to reel and started to add various embellishments from the CD such as the hat, pins, scissors, bunting, birds etc...


Once they were in place I felt that the reel needed some 3D elements so I added some little wooden reels available from Polka Doodles.


By this point I was starting to run really short on time so I grabbed my mini flower punch that I seem to use on almost every project at the moment and punched an assortment of flowers from the papers I'd printed from the CD. I then mixed these up with some of the handcut flowers from the CD.


I had lots of fun making this project and will definitely be grabbing more of these reels for use in future projects.


Thanks for stopping by today.

Claire x

I'd like to enter this project into the following challenges:
Altered Eclectics - Anything Goes
Ladybug Crafts - Anything Goes
Rhedd's Creative Spirit - Anything Goes
The Mirror Cracked - Anything Goes
Crafty Cardmakers - Ribbons,Lace & Pearls
Not Just Cards- Antything Goes
Try it on Tuesday - Recycle It

Sunday, 7 September 2014

Altered Sardine Can - Gone Fishing!


So did you catch the show on Create & Craft today? If not then you can catch it here or on Catch Up TV - it was an amazing show with plenty of lush samples from my teamies and a genius demonstration from Nikky Hall involving hot glue!!! Anyway, I thought I'd pop in and show you this fun little piece that I made for the show using the new Winston Collection from Polka Doodles.



There are loads of fun techniques I've used on this project and I have to say that although it was a touch fiddly in places, I had an absolute blast making it! I know this getting to be a habit but there are loads of pictures in this post so apologies if it slow loading!

As many of you know I love upcycling stuff that would otherwise be discarded in the trash. I'm always on the look out for odd tins, bottles and boxes and as a result have a quite a hoard! Anyway as soon as I saw one of the design sheets on the CD I just knew that I had to alter a sardine can from my stash. Now for those of you worried about the smell, don't be, simply wash it out thoroughly with hot soapy water and then soak it in bi-carb and hot water overnight and any smell will be removed.


The first thing I did was to create a "lid" out of card. I simply drew around the tin and then cut it to size.


I then hot glued some beads onto the base to make feet and then coated the whole thing generously with Gesso, along with the card lid. Whilst I waited for it to dry I printed out the design sheet from the CD, cut it out and layered it up with silicone glue.


Once the tin and card lid was dry I dabbed on some course modelling paste (if you don't have this try mixing a bit of sand or salt in with some fine modelling paste or gel medium) and again left it to dry.  I then covered the entire tin and lid in silver acrylic paint. I then added a thinned down coat of black acrylic paint to it and lightly swiped it over with a cloth so that there some areas of silver showing through. Before this dried thoroughly I added some Burnt Umber acrylic paint and some Burnt Sienna. I then left the whole to dry for thirty minutes or so.


I then printed some dotty papers from the CD and cut them to fit the tin to create the water. The bullrushes were freehand cut from scraps of paper and coloured with my Graph'It Markers. I then glued each of the individual elements into the scene.


Finally, I rolled up the lid and cut jagged edges into the sides where it was curled before gluing it into position on the tin. The key was an old corned beef tin key that seem almost impossible to find these days, so I made a mold and cast a few extras. This was then rusted up in the same fashion described above.


If you buy the Winston CD please do stop by and show me what you made - I love looking at other peoples creations. Alternatively, please feel free to share with all the other Polka Doodles fans on Facebook Page


Thanks for stopping by today.

Claire xxx

I'd like to enter this project into the following challenges:
Altered Eclectics - Anything Goes
A Little Bit Crafty - Distress It
Crafts & Me - Time for Anything
Natalie & Amy's Challenge - Things with wings
Rhedd's Creative Spirit - Anything Goes
The Mirror Cracked - Anything Goes

Friday, 25 April 2014

Adrift...........


Isn't she beautiful? This was another of my norty but nice stash purchases that I've only just got round to playing with!! However, the real reason for this post is to let you know about the fabulous challenge GREYS over on the Graph'It Marker Challenge Blog and to announce that I've joined the design team! :)

I'd really love it if you could join us - you don't need to use Graph'It Markers, you simply need to follow the theme set for the challenge. Also, don't forget to pop over to the blog to join in with our Birthday Candy - it is absolutely amazing and I'd love it if one of my followers were to win.


Anyway,  I've decided to keep this make fairly simple to show off the image (as for once I'm actually pretty pleased with my colouring). I've attempted grey sky and moving water!!! Eeek!!

For those of you interested, the colours I used are as follows:
Water: Cool Grey 0 (9100), Cool Grey 1 (9101), Cool Grey 3 (9103)
Sky: Neutral Grey 1 (9501), Neutral Grey 4 (9504), Neutral Grey 6 (9506), Blender (0000)
Skin: Light Caramel (4170), Skin (4155), Powder (4135), Cotton (4115)
Boat: Smoke (3210), Lichen (3230), Havana (3245), Bronze (3250), Cigar (3255), Mocha (3280)
Figure/Flowers: Ghost (4125), Burgundy (5280), Aqua (6110), Lavender (6140), Bougainvillea (6170), Anise (8250), Military (8280)

The white spray was created using my new white Shake Marker from Graph'It - I actually have to say I love it!!! It goes on as a transparent liquid but drys opaque. To create the spray I dabbed the pen around the helm of the boat and then blended it with my fingers. Once it was dry and I was happy with the placement of the spray I gently built it up to increase the depth and tone.


I created the frame from an embroidery hoop which I covered with modelling paste and then painted with re-active paint. I added some punched flowers and leaves that have been painted with the re-active paint. Finally I attached the image to the frame.

Thanks for stopping by today.

Claire x

Supplies:

Maimeri Light Modeling Paste 200ML 12pk Mix Greys - Graph'It Markers 

I'd like to enter this project into the following challenges:
Crafty Girls - Anything Goes
C.R.A.F.T - Not a card
Crafty Ribbons - Anything but a card
Ecletic Paperie - Wood (Frame and boat)
Altered Electics - Anything Goes
One Crazy Stamper - Anything Goes
Rhedd's Creative Spirit - Altered Art
That Craft Place - Anything Goes
Simon Says Stamp - Big Stamp

Tuesday, 25 March 2014

How Pink???

So did you get to see the Polkadoodles Show on Create & Craft TV this morning? I did and WOW what a show! Anyway, I made a few samples for the show but had a bit of a hiccup with delivery so it was hit and miss as to whether any of my samples would actually appear! As luck would have it they miraculously appeared halfway through the show. This is one of the samples that kept sneaking into view, I'll show you others over the next few days.

Anyway, I created this canvas using the new Work & Play 2 CD from Nikky Hall and have managed to shock myself with the amount of pink I've used!! Now I know a lot of you don't like CD's (I have no idea as to why, they are exactly like using a digi only better value and they don't take up room on your PC) so she has also released the characters as digis for you to be able to buy and download separately (this item is exclusive to Create and Craft TV until 1st April 2014, so if you're desperate for it then might want to order it from them).


I have to say I had lots of fun creating this picture and used it as an excuse to experiment! Now I know you'll be looking at the picture thinking "what experiment?" Well if you look at the background you will see that I have used one of the digital papers, now if you look even closer you will see that the canvas texture shows (click on the picture to be taken to a larger version which you can then zoom in on)! So how did I do it? Well I used a good old fashioned transfer technique which basically means that you print your digi paper as normal and then transfer it onto canvas leaving only the image and not the paper! I have to say it's become a bit of an obsession with me at the moment and you'll be seeing more of this technique in the next few weeks along with a few hints and tips and maybe a tutorial.


Once I'd created the transfer background using the patterned paper, I decided to try and do a secondary transfer with the sentiment. This was fairly successful, although I discovered that I didn't need to cut the paper tight around the text. It would've been better to have left plenty of paper surrounding it as the text lifted slightly in places which meant I had to touch it up!

To hide any shabby areas and add a bit of texture, I added some course modelling paste from my stash and dabbed gold acrylic paint around the edges. In places the transfer wasn't brilliant so I mixed some pale pink acrylic paint into some Maimeri Iridescent Paste and swiped it over this area with my fingers.

I cut out the image and coloured it with my Graph'It markers. I then gave her a little dimension by running my ball tool around the edge before mounting her on the canvas using silicone glue. Once the glue had dried I added some glitter glue to her tutu and hairband.


Next I made the ballet shoes. Now some of you have probably made these for your Barbie or Sindy Dolls when you were kids? They are dead simple and quick to make, but really add to the overall effect. The hardest part is the ribbon as it's a little fiddly and you have to wait for the glue to grab (unless of course you are using a hot glue gun). Again these have been glittered to within an inch of their life!

Finally, I've added some ribbon curls, ribbon flowers, pearl stars and pearls to pull it all together.


I hope you like this little canvas. Thanks for stopping by today.

Claire x

I'd like to enter this project into the following challenges:
All Crafts Challenge February/March - Anything but a card
Artistic Inspirations - Anything Goes
Crafting From The Heart - Anything Goes/Spots or Stripes
Craft It Up & Link It Up With Craftin Desert Divas - Brads, Button, Ribbon or Twine
Created With Love - Girly
Simon Says Stamp Monday Challenge - Transparent (the tutu is tranparent)
My Craft Spot - Anything Goes
Robyn's Fetish - Anything but a card
Aud Sentiments - Anything Goes
Crafty Ribbons - Anything Goes
Simon Says Stamp - Glitter

Tuesday, 18 December 2012

Cat's Choir! Christmas Box

Good morning. It's my turn post over at the Stampotique Designers Blog, so I've decided to double up this post with the Crafty Ribbons Advent post.  I've been desperate to show you this wall hanging, but have been unable to do so until I knew that it been safely received! It was a complete devil to photograph, so please excuse the picture quality.


It started life as a simple kraft box frame from  The Range. I covered it with a thick layer of Gesso and dabbed at it with a palette knife to give it loads of texture. Whilst it dried I stamped out, cut and coloured Oh Tree, Small Tree Topper, Front Door Shrubbery, Christmas Ornaments Cube, Mini Christmas Ornaments Cube, Welcome Door, Line Up and Snowman. I then drew a little carol book and die cut a Lampost using my new Sizzix Die and coloured them with Promarkers.


Once the Gesso had dried, I layered up some torn,inked strips of paper and dabbed some textured modelling paste over them. As the frame still looked a little bare I added some silver heat embossing using Abstract Foliage. Once the base was completed, I created the scene.


To finish I chucked on a bit of glitter and some Glossy Accents. I then added the fantastic Merry Christmas ribbon from Crafty Ribbons, and some Pinflair icicles which were covered with Glamour Dust.

Thanks for stopping by today.

Claire x

I'd like to enter this project into the following challenges:

Wednesday, 5 December 2012

Have Faith!!! It's a Gesso ATC

Morning. Surprised to see me I bet? Well I thought that I'd show you this ATC that I made for the Wicked Wednesday ATC Challenge Blog who are being sponsored this week by Stampotique. The theme is "Wing It" which basically means anything with wings, so should be a nice easy challenge for most of you.

I have to say I really don't know why I don't make more ATC's as I had lots of fun with this one and they are great for trying new techniques and using up scraps of card. Maybe one of my New Years resolutions will be to make an ATC a week and participate in few swaps?


Anyway, onto my ATC. I used a Gesso technique that I'd spotted in Craft Stamper magazine to create the textured background. I liberally sprinkled the wet Gesso with angel dust aka as glitter and left it to dry. Whilst I waited for the Gesso to dry, I stamped Daniel's Tree Topper Large onto lightweight card three times, coloured with Promarkers and then cut her out.


Once the Gesso was completely dry,  the raised parts were swiped with silver acrylic paint and the edges stamped and heat embossed using Abstract Foliage.  The angel was then decoupaged onto the ATC. I printed the sentiment from JM Barrie onto tissue paper and then cut it out and used Mod Podge to place it onto the ATC. At this point I decided that the ATC needed something more, so I stamped Daisy Daisy onto some tissue paper, coloured with Promarkers and Mod Podge'd (is that a word??) it into place.

I do hope that you'll join the challenge.

Thanks for stopping by.

Claire x

Saturday, 1 December 2012

Woooo Hoooo!!!! 24 Days To Go!!! Advent Countdown Chalkboard

Good Morning. Can you believe that it's the first day of advent??? No me neither - you just know that one blink and it's going to be Christmas Eve! :D Today sees the start of Crafty Ribbons Christmas Event which can only mean one thing...... lots of lovely inspiration and prizes each and every day! To enter simply pop across and enter your name in Mr Linky.

So to help keep us all on track I've designed this Christmas Themed Chalkboard. I've decided to use mine as a countdown calendar, until the big day when it will become a "Mum's Kitchen's Closed" sign!


I found the chalkboard in the poundstore and have used elements from Studio 12 Picknix Collection 2 - Gingerbread Twist to decorate it (and yes everything was handcut - sigh Santie I've been a real good girl won't you please deliver me a Cameo Silhouette???). The gorgeous gold edged organza ribbon is of course from Crafty Ribbons. To finish I've added Rock Candy Stickles, Star Dust Stickles and of course Glossy Accents.

Thanks for stopping by today

Claire x

I'd like to enter this project into the following challenges:

Wednesday, 14 November 2012

UTEE Bee Necklace

Wow where is time going? I can't believe that it's time for another challenge over at Stampotique! This week we want to see Nature themed projects. Remember to play along with us you don't need to use Stampotique stamps (although we'd obviously love it if you did) and you now have until the first challenge of the following month to submit your entries, so plenty of time to get those gorgeous creations in!

For those of you who regularly follow my blog, you will possibly remember me showing you my Steampunk Bee which my daughter was rather taken with before I "steam-punked" it and turned it into a wall hanging. Well I finally got round to making her a UTEE Bee which she then wanted made into necklace, so here it is....


I stamped Big Bee onto card five times, cut him out,coloured and layered him up with Pinflair Glue. Then I punched holes into the wings and swiftly dunked him into a molten UTEE/UTEE Flex bath. The wings were then given a coat of Star Dust Stickles before adding the jump rings and double length of chain.

However, you know what kids are like they are never satisfied and she now wants a ring and bracelet to match, so guess who's had to buy Small & Medium Bee?? So you know that shortly I'll be showing you those!! 

Thanks for stopping by today.

Claire x

I'd like to enter this necklace into the following challenges:
Make It Monday - Anything goes
Inspire Me Fridays - Anything goes

Friday, 9 November 2012

Vintage Keepsake Bauble Book Card

This is the last of my TV samples that I made for the launch of the Studio 12 Picknix Collection 2 - Gingerbread Twist CD. If you've been watching the shows you will doubtless have seen it! Just incase you missed it or fancy a closer peek, here it is in all it's glory!

I warn you now this post is going to be picture heavy, so apologies if the page is slow loading.


I wanted to make something using the traditional gingerbread man and after much umming and arrrghinhg and stash sorting I settled upon making a book card with a detachable bauble.


I've had some papier mache baubles in my stash for what seems like forvever. I'm really not sure why I haven't used them before as I really enjoyed altering the bauble and what's more it actually looks pretty good too!


The book card has been made to fit the bauble and so that it could hang and be removed I've simply made a hole in the top of one of the "pages" and pulled the thread through. It has been secured at the back using cinnamon scented melted wax.


The card uses papers from the cd which have been distressed, painted upon, ripped and faux stitched to within an inch of their lives! I've used a mixture of pre-coloured collage images and digital stamps coloured with Promarkers to create the focal points on the card.


If you look closely at the ribbon tie on the side of the card, you will see that it picks up the paper ribbon on the front of the card.... yep, homemade ribbon using one of the images from the CD. I'm sooo excited that this worked as it now means that I can get coordinating ribbons for all my projects :D


I do hope that you like my project and that I haven't bored you to tears with this long post.

Thanks for stopping by today

Claire x

I'd like to enter this project into the following challenges:
Paper Crafting Journey - Anything goes
Simply Create - Anything goes
Crafts & Me - Reds
Just keep On Creating - Christmas
Whimsy Inspiration - Christmas
Papertake Weekly - Anything goes
Through The Craftroom Door - Anything goes
Make It Monday - Anything goes

Wednesday, 24 October 2012

Copy Cat? Or Inspired By?

Morning. It's time for another challenge over at Stampotique and this time we want to see you CASE a member of the DT's work. Now this is a challenge that I'm not altogether comfortable with as whilst I think it's OK to take inspiration from another person I don't think it's OK to copy their work in it's entirety especially when no credit is given to original artist. In addition when someone has created something brilliant, that little voice of self doubt creeps in and tells me that I'll never make anything as good/beautiful and as a result kills my mojo. Anyhow, as the challenge had been set I thought I'd play along, so I had a good look round my fellow team mates blogs and selected my victim!!!

I decided that I CASE my uber talented teamy Samantha Read and make one her fantastic glass cubes. I knew that it was going to be a challenge to make one of these that looked half presentable, but man I didn't think I'd fall at the first hurdle!! Oh and you'll have to excuse the picture quality on this post as well, it was an absolute nightmare to photograph!


Firstly, my Memory Glass was only 1 1/2" but I decided I could live with that, but then I spotted that Sam had used Super Glue :O - help........!!!! I'm such a messy worker that the words Super Glue struck terror into my heart. I've only used the stuff once and it almost ended in a trip to A&E with the kitchen worktop in tow!!! So with that in mind I was all but ready to go and CASE someone else! However, you know me I won't be defeated, so I slept on it and thought I'd try a couple of other things in place of the Super Glue.

I started off by trying UTEE which was OK but didn't allow me enough time line up the glass fully. Then I moved onto Memory Tape - this was reasonably successful but just looked a little cumbersome and kind of swamped my cube. So my last resort was Pinflair Glue - omg I love this stuff! It worked a treat!


I then stamped Snowman, Oh...Tree and Picket Fence onto white shrink plastic, coloured with pencils and then once shrunk glued them into position. I added some "faux snow" that I got in the Pound Store and then sealed my cube.

Sam used molten embossing powder to create the "faux soldered" effect on her cube and mentioned that her's had fallen to pieces a couple of times whilst dipping - eeekkk - molten UTEE burns just do not do it for me!!! I contemplated leaving the glass joints as they were, but then noticed that I had a tiny gap in the top right corner. So, I thought I'd try my usual swipe with Versamark and embossing powder technique. So glad I did as it worked just fine and I felt like I had a little more control over where the embossing powder went. Also, where odd specks of the powder stuck to the glass it gave a frosty effect (this can be scraped off if you don't like that effect).


To finish I added a shrink plastic snowflake and some glass pearls. I then looked at it and thought that it needed something else, so I added some Pinflair Glue Icicles (idea for these nicked from here). I've tried to show you how gorgeous they look in the above picture, but seem to have failed miserably :(

So what do you think of my spin on Sam's cube, is it a copy cat one or simply inspired by her?

Thanks for stopping by today.

Claire x

I'd like to enter this project into the following challenges:
Through The Craft Room Door - Anything goes
Make It Monday - Anything goes
Stamptacular Sunday - No rules
Inspire Me Friday - Anything goes
Anything but a card - Anything but a card

Sunday, 14 October 2012

Look what I did!!!

See this is what I do to keep myself out of mischief at the weekends! Last weekend I was lucky enough to attend an Andy Skinner workshop with the seriously bonkers Siobhan Brignull (aka Essex Gal) and this is what we made.


I know it's not my usual thing, but I really do like it. The class was technique rich and I'm pleased to say that I'm no longer afraid of doing an image transfer onto wood and can finally create convincing rust!!! The only thing that didn't go to plan on this project was the cracking, which I suspect was more to do with me than the product ;D However, I have to say the lack of cracking has led to a "happy accident" - I added more of the cracking solution and did indeed get more ultra fine cracks, but if you look closely it also created a rather fantastic pitting effect!

Thanks for stopping by.

Claire x

I'd like to enter this project into the following challenges:
Simon Says Stamp & Show - Rustification (sorry guys you must be sick of seeing these by now!)

Friday, 12 October 2012

Vintage Christmas Tag

It's my turn to post over at the Studio 12 blog today. This was a really quick and easy tag using up all of my left over scraps and a photograph/scan of my mixed media wall hanging. What do you think?


The colours on the photograph have been manipulated in my photo editing software. I've then sized the image to my required size before running it through my printer and cutting with a Sizzix Tag Die. The masking tape was left over from a snowflake card which you no doubt spotted on the launch show, but I have yet to show you, and the seam binding and embroidery thread were in my stash. Before I go I just want to show you a different view of the tag in particular the baubles, as I've used a Sakura Glitter pen for sparkle and a Sakura Glaze Pen for shine and dimension (have to say it is one of my most favourite gizmos at the moment!).


Thanks for stopping by today.

Claire x

I'd like to enter this tag into the following challenges:

Related Posts Plugin for WordPress, Blogger...