Yep we've come to the end of my samples using this fabulous new kit. I hope you've enjoyed seeing my creations?
This card was fairly quick and easy to make. I distressed the papers with scissors and rolled and scrunched the edges.
The cage was die cut, painted with gold acrylic paint and once dry stamped with Stazon.
The elegant nest die cut has been edged with acrylic paint prior to stamping the sentiment.
Thanks for stopping by today.
Claire x
A blog about Mixed Media, Paper Crafts, Altered Art and bit of card making thrown in for good measure. You will also find the odd tutorial and giveaway.
Showing posts with label Belle Papillon. Show all posts
Showing posts with label Belle Papillon. Show all posts
Wednesday, 28 December 2016
Tuesday, 27 December 2016
Shabby chic card
Just popping onto share another card made from the Belle Papillon and Bella Fleur collections.
I die cut the large Elegant Nest from the Belle Papillon Paper Pad, brushed the edges with gold paint and then heat embossed the sentiment.
The papers were distressed with scissors. I used Nikky's Stab n Stitch Tool to create the faux stitching and then ran a fine liner over the holes.
The butterflies were stamped onto shrink plastic and the larger one of them was die cut with the matching doublet die.
I then layered up the papers, lace and embellishments onto a kraft card blank.
Thanks for stopping by today.
Claire x
I die cut the large Elegant Nest from the Belle Papillon Paper Pad, brushed the edges with gold paint and then heat embossed the sentiment.
The papers were distressed with scissors. I used Nikky's Stab n Stitch Tool to create the faux stitching and then ran a fine liner over the holes.
The butterflies were stamped onto shrink plastic and the larger one of them was die cut with the matching doublet die.
I then layered up the papers, lace and embellishments onto a kraft card blank.
Thanks for stopping by today.
Claire x
Monday, 19 December 2016
Simple circle card
Me again! This time I'm sharing a simple circle card. This was super quick and easy to make using the new Belle Papillon and Bella Fleur kits from Polkadoodles.
I simply used a circle die to cut my shaped card and papers. I then added some die cut flowers, flourishes and foliage. The flourishes and foliage were trimmed to sit neatly on the edge of the card.
To finish I stamped and heat embossed the sentiment.
Thanks for stopping by today.
Claire
Materials:
Belle Papillon and Bella Fleur Kits
I'd like to enter this card into the following challenges:
I simply used a circle die to cut my shaped card and papers. I then added some die cut flowers, flourishes and foliage. The flourishes and foliage were trimmed to sit neatly on the edge of the card.
To finish I stamped and heat embossed the sentiment.
Thanks for stopping by today.
Claire
Materials:
Belle Papillon and Bella Fleur Kits
I'd like to enter this card into the following challenges:
Sunday, 18 December 2016
Vintage Frame From An Old Christmas Card Box
Hopefully you all saw the shows on Create and Craft TV on Friday and loved the new collections from Polkadoodles? If you missed it or don't live in the UK you can watch the 11am show and 3pm show for a limited period by clicking on the highlighted links.
If you caught the 3pm show you would've seen the little vintage style box frame with a shrine setting. I was honoured and exceptionally pleased that Nikky demonstrated how to make a similar frame and then put her own spin onto it.
Anyway, here's the frame. I hope you like it and aren't bored by all the photos!
I used an old Christmas card box lid for the actual frame and one of those little wooden boxes that some companies have started using for packaging embellishments for the shrine. I traced the smaller box onto the larger box and then cut just inside of the marking with a craft knife and checked to make sure it fitted snuggly. I then covered the box with papers from the Belle Papillon pads and made a x in the shrine opening. I then popped the shrine in leaving it slightly proud, and glued the papers to the back of it to support it.
The shrine was painted with gold and cream acrylic paint and I used PVA glue to create a crackle effect.
I die cut the leafy branch from the Birdhouse Doublet Set into an old cereal box and used the negative as a stencil to apply modelling paste to bottom edges of the frame. Once dry I applied Docrafts Gold Acrylic paint with my finger.
The edges of the frame were swiped with ink before heat embossing with gold embossing powder. I stamped a torn piece of the patterned paper with the script stamp from the Belle Papillon Stamp Set and glued it next to the shrine. I then sprinkled some frantage embossing powders over the front of the box.
Using the Belle Papillon Stamp and Doublet die set I cut and coloured a shrink plastic cage, bird and butterflies. Before arranging them inside the shrine.
To finish, I added some moss, broken twigs and flowers.
I'm really pleased with the way this project turned out and plan on making a set for my hallway.
I have a few more projects from the show to share with you over the next few days. Thanks for stopping by today.
Claire x
Materials
Belle Papillon Stamps, Dies and Papers
I'd like to enter this project into the following challenges:
If you caught the 3pm show you would've seen the little vintage style box frame with a shrine setting. I was honoured and exceptionally pleased that Nikky demonstrated how to make a similar frame and then put her own spin onto it.
Anyway, here's the frame. I hope you like it and aren't bored by all the photos!
I used an old Christmas card box lid for the actual frame and one of those little wooden boxes that some companies have started using for packaging embellishments for the shrine. I traced the smaller box onto the larger box and then cut just inside of the marking with a craft knife and checked to make sure it fitted snuggly. I then covered the box with papers from the Belle Papillon pads and made a x in the shrine opening. I then popped the shrine in leaving it slightly proud, and glued the papers to the back of it to support it.
The shrine was painted with gold and cream acrylic paint and I used PVA glue to create a crackle effect.
I die cut the leafy branch from the Birdhouse Doublet Set into an old cereal box and used the negative as a stencil to apply modelling paste to bottom edges of the frame. Once dry I applied Docrafts Gold Acrylic paint with my finger.
The edges of the frame were swiped with ink before heat embossing with gold embossing powder. I stamped a torn piece of the patterned paper with the script stamp from the Belle Papillon Stamp Set and glued it next to the shrine. I then sprinkled some frantage embossing powders over the front of the box.
Using the Belle Papillon Stamp and Doublet die set I cut and coloured a shrink plastic cage, bird and butterflies. Before arranging them inside the shrine.
To finish, I added some moss, broken twigs and flowers.
I'm really pleased with the way this project turned out and plan on making a set for my hallway.
I have a few more projects from the show to share with you over the next few days. Thanks for stopping by today.
Claire x
Materials
Belle Papillon Stamps, Dies and Papers
I'd like to enter this project into the following challenges:
Friday, 16 December 2016
Did you see Polkadoodles new product launch on Create and Craft TV?
Today saw the launch of several new products from Polkadoodles. If you caught the show you will have seen some of the samples that I made using them.
I know Polkadoodles are normally associated with CD and digital crafting but did you know that they've just launched paper pads and cutting dies? The papers are truly beautiful and the dies.... well what can I say? They cut beautifully (even shrink plastic) and a gentle tap on the table top releases the cut from the die. There's none of this poking every single little piece of paper out of intricate dies!
Anyway, I could go on and on about the new products but I won't, instead here's one of my samples that I made for the show. This was one of the cards that Nikky demonstrated.
I stamped the Belle Papillion stamps and coordinating die set onto shrink plastic and coloured the elements with Lyra pencils.
The papers have been distressed using scissors. I've then used Nikky's Stab and Stitch Pokey Tool Kit to create some faux stitching around the edges.
The sentiment has been heat embossed on vellum and I coloured all of the die cut pieces with Distress Inks before layering up onto the card.
I'll be showing more of my samples over the next few day, so please if you get five minutes pop back and take a peek.
Thanks for stopping by today.
Claire x
Materials used:
Belle Papillon Craft Kit
Papers and Stamps
Dies
Stab n Stitch Tool Kit
Wow Embossing Powder
I know Polkadoodles are normally associated with CD and digital crafting but did you know that they've just launched paper pads and cutting dies? The papers are truly beautiful and the dies.... well what can I say? They cut beautifully (even shrink plastic) and a gentle tap on the table top releases the cut from the die. There's none of this poking every single little piece of paper out of intricate dies!
Anyway, I could go on and on about the new products but I won't, instead here's one of my samples that I made for the show. This was one of the cards that Nikky demonstrated.
I stamped the Belle Papillion stamps and coordinating die set onto shrink plastic and coloured the elements with Lyra pencils.
The papers have been distressed using scissors. I've then used Nikky's Stab and Stitch Pokey Tool Kit to create some faux stitching around the edges.
The sentiment has been heat embossed on vellum and I coloured all of the die cut pieces with Distress Inks before layering up onto the card.
I'll be showing more of my samples over the next few day, so please if you get five minutes pop back and take a peek.
Thanks for stopping by today.
Claire x
Materials used:
Belle Papillon Craft Kit
Papers and Stamps
Dies
Stab n Stitch Tool Kit
Wow Embossing Powder
Subscribe to:
Posts (Atom)

















